Electric Concrete Vibrator - 120V Corded

It stops vibrating and you have to tap the end on the ground then it will work for a few minutes again

This electric concrete vibrating tool is essential for pouring smooth level concrete surfaces. Works great! Easy to setup, easy to use. No problems thus far!

I got this vibrator to remove voids/air pockets in concrete piers that I poured to support deck posts. It worked like a champ. The holes that I poured were 20 inches wide and 32 inches deep. I filled each to the top of the form and then inserted the vibrator and turned it on. I had to insert the vibrator about 6-7 times per hole (once in the middle and 5-6 times arounds the perimeter). Bubbles immediately worked their way to the surface as the voids were filled and the surface of the concrete correspondingly dropped 1-1.5 inches per hole. It took a little over one minute to vibrate each hole. The tool is extremely effective and cleans up quickly and easily.

So far very impressed with this unit. Will be challenging this vibrator on 5 cubic yards.

Holy moly - this is one of those tools you didn’t know you need until you use it. If you’d have told me I needed a concrete vibrator, I would have made some off-color jokes and then told you to go away. The off-color jokes lasted until I plugged this in and used it on a wheelbarrow full of concrete and just watched it smooth out. I poured the pad and used it again, and it made smoothing everything out ridiculously easy. This is one of those “in the know” tools that folks that work with concrete a lot use all the time, but don’t talk about. I hope this was at least a little helpful - if you have a concrete project coming up, I highly recommend picking one of these up. I’d loan you mine, but between my brothers and in-laws, it’s on constant loan already.